Momo Punch is a metal jig that is fully compatible with offshore jigging, as well as shore jigging from breakwaters, surf, and reefs.
The thin body with excess fat trimmed away to the limit and the calculated curved tail create a sharp wobble slide action that activates the fish eater’s instincts and induces a reaction bite. A
wide range of sizes are available to accommodate various conditions.
The shape and thickness are not designed to be the same size, but are different for each model to achieve the ideal action.
Momo Punch uses mold molding instead of regular rubber molding.
The greatest advantage of mold molding is that the casting error is very small at less than ±1%, so there is no unevenness in each production lot.

*The MOMO PUNCH is a sliding jig with a center-gravity design. We recommend setting an assist hook on the front.

*When fishing in rough terrain or when fish are active, use one assist rod on the front.
When you want to prioritize hooking or fish are not active, we recommend using two assist rods on the front.

※please note※

Since the Momo Punch is designed with an emphasis on making the slide as thin as possible, it may bend slightly if it is hit, pinched, or subjected to impact.

Because the body is made of a through-wire and poured into a mold, bending it does not affect its strength at all. You can also straighten it by hand before using it.