|
| CK-93MH+S
This high-power spinning shaft was created for aggressive fishing against large fish in areas that require a highly difficult approach, such as rapids in rivers and around structures. The new 9.3ft length realizes maximum shaft power with minimal weight. The excellent shaft balance fully demonstrates the blank's performance in both high-footing approaches and wading, achieving excellent handling. It is a versatile model that can handle a wide variety of lures, from the X-80 SW of about 10g to big baits such as the I-SLIDE 185 of about 60g. The unique tip section is flexible yet sharp enough to precisely control the lure and capture short bites, while the strong, high-tension belly section sets the hook, and the butt power gives a sturdy, high-rigidity feel. The 9'3" shaft exerts high torque throughout the entire body to dominate the fight, making this a new benchmark for sea bass rods. This is a model that will allow you to take on the occasional attack by yellowtail-sized bluefish without any hesitation.
- Length: 2.82m (9'3'')
- Closed Length: 145cm
- Action: Medium Fast
- Lure: Max 60g
- Line: Max PE #3.0
- Weight: 195g
- Number of Joints: 2 pcs
- Carbon Content: 99%
CK-810MHS
This is a technical power game special that should be used by experienced anglers who are familiar with the spots where large fish are located, such as pin spots, bridge piers, sunken roots, and breaks in small and medium-sized rivers and large rivers. The sharp high-impact blank, which thoroughly eliminates shaft vibration with the 5D graphite system, demonstrates overwhelming long-distance castability. At the same time, it achieves high accuracy performance at long distances. It demonstrates clear synchronized linearity that allows you to imagine the distance, range, and action of the lure as if you were holding it in your hand during retrieval, and impressive high sensitivity characteristics that were not possible with a sea bass rod. It develops aggressive fishing that is angler-led, catching the pre-bite, actively hooking it, and forcibly pulling the monster off the structure. It is a Spartan shaft developed for experts.
- Length:2.69m (8'10'')
- Closed Length: 149cm
- Action: Medium Fast
- Lure: Max 50g
- Line: Max PE #3.0
- Weight: 173g
- Number of Joint: 2 pcs
- Carbon Content: 99%
TECHNOLOGY
5-D Graphite System
The 5D Graphite System is a new generation shaft technology established by the Destroyer shaft, which dominates tournaments around the world. As the name suggests, five prepreg cutting parts, each specially designed for five elements (vertical, horizontal, oblique, elongation, elasticity), are combined like a puzzle and press-fused into one shaft. By reducing the overlap of the prepreg (overlap due to overlapping winding) brought about by the previous layered system, we have succeeded in achieving fine rod action and high toughness in an overwhelmingly lightweight shaft. Since there are no excessive graphite layers, maximum rod performance is achieved with the minimum amount of material used. Cookai brings a new sensation of saltwater game.
Head Locking System (PAT.P)
Based on the head locking structure carved from a solid aluminum block, which evolved in the Destroyer series, it has been optimized and designed as a rigid body that adjusts to powerful targets in the sea. It significantly increases the support shaft rigidity of the blank butt section when a reel is attached. In addition, since the vibrations of even the slightest bites or changes in lure action, such as touching a minnow or jig, are transmitted without loss from the rod tip to the reel seat, they are amplified and transmitted accurately to the angler's hand. We are pursuing a new sense of directability in which the angler's trunk, arms, fingertips, and all of their senses are linearly connected to the rod shaft.
IES reel seat (D.PAT.P)
The fast-back bridge hump fits deeply into the palm of the hand. The ergonomic design, which has been 3D-ized based on ITO Engineering's unique fishing verification data, suppresses the springback caused by the swing of the high-impact shaft, providing a comfortable grip and thoroughly reducing stress for aggressive fishing. It achieves both linear controllability for minnows and jigs and the intuitive performance required for bottom fishing. Since you can directly touch the blanks that expose the airy shape, it also improves the resolution of contact and sensitivity for bottom fishing due to long castability.
Titanium frame SiC-S guide
All models are equipped with ultra-lightweight, high-strength titanium frame/SiC-S guides, specially selected for Megabass' unique setup. Assuming various methods and situations, the ITO engineering and development team and Megabass saltwater specialist teams nationwide jointly tested the setup data in actual fishing, and feedback was provided without exception. The latest guide system is introduced, incorporating the optimal solutions found at this time, based on a wide range of on-site testing, including long distance castability, lure controllability, directability, interface through line management, and stress dispersion of load-bearing capacity from 0°θ to 130°θ during fights.
Hand-built by Megabass Factory ArtWork Thread
This is an artwork thread carefully wound by the master of the Megabass Factory. The beautiful custom threading, which is alive with the traditional Destroyer Rod Building, also has the strength to fully handle unexpected monster encounters.
GUIDE THREAD COLOR
(Cookai) ■INNER THREAD: BLUE SCOZIA
■OUTER THREAD: AIRFORCE-SCURO
■OUTER TRIM: STREAM GALAXY
GUIDE THREAD COLOR
(Cookai Gulf) ■INNER THREAD: YACHTING BLUE
■OUTER THREAD: AIRFORCE-SCURO
■OUTER TRIM: STREAM GALAXY
SHAFT THREAD COLOR
■BASE: AIRFORCE-SCURO
■CENTER PINLINE: BLUE Cookai
■OUTER TRIM: STREAM GALAXY
| Regular price
From $880.00
Sale price
From $880.00
Regular price
| Megabass | |
Model
CK-93MH+S,CK-810MHS
|
